Washer Repair in Winston-Salem — Book a Visit Today

Washers fail loudly. A bearing going out sounds like a jet on spin. Other times the tub fills, then just sits there full of cold water and wet towels because the drain pump jammed on a coin. Front loaders leak from the door boot. Top loaders quit mid cycle when the lid switch wears down. We service washers in Winston-Salem homes and out toward Kernersville, on all major brands. Bail the water out if you can, then call us and describe the last thing the machine did.

Real person answers
Open 7 days
Written quotes

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM CT

Washer Repair technician in Winston-Salem, NC

Common washer faults in Winston-Salem homes

Water's just sitting in the tub Usually a clogged drain pump, a jammed impeller, or a kinked drain hose keeping the water from leaving.
It shakes hard enough to walk across the floor Worn suspension rods, tired shock absorbers, or failed drum bearings let the tub swing out of balance during spin.
Clothes come out soaked after spin Points to a weak spin cycle — drive belt, motor coupler, or a lid switch that never confirms the door is shut.
Machine stops mid-cycle and flashes a code Control board, water level sensor, or door lock faults commonly interrupt a cycle and park the machine there.
Something smells sour and there's water on the floor Cracked hoses, a leaking tub seal, or a biofilm-packed detergent drawer and gasket are the usual sources.

Winston-Salem coverage

We cover Winston-Salem from 27101 and 27104 out through 27107, plus Clemmons, Kernersville, and down toward High Point and Lexington.

Other repairs we do in Winston-Salem

All washer repair → · All Winston-Salem services →

Washer Repair in Winston-Salem — quick answers

Is my washer worth repairing or should I replace it?

Depends on the failure. A pump, valve, belt, or door lock is routine work on a machine with years left. A failed outer tub bearing on an older unit is a bigger job. Our technician tells you which one you're facing.

What should I do about the water still in the drum?

Leave it if you can. Moving a full tub sloshes water into the cabinet. If you need it out, set the drain hose end low into a bucket and let gravity work, then towel up what spills.

Do you work on front load and top load washers?

Both. Front loaders bring gasket leaks, bearing noise, and door lock faults. Top loaders bring lid switches, motor couplers, and drain pump clogs. Our technicians carry common parts for both styles and diagnose either on site.

Why does my washer smell even after I clean it?

Smell usually lives where you can't reach — the drain pump filter, the boot gasket fold, or the detergent dispenser channel. Biofilm builds there and survives surface cleaning. A technician can pull those pieces and clear them out.

How soon can you get to my house in Winston-Salem?

Give us a call and tell us your ZIP and what the appliance is doing. We'll find the next open slot for your part of town and give you a window, so you're not sitting home all day guessing.

How it works

Step 1
Tell us the symptom
Call us or fill out the form. Describe what the appliance does and does not do. Noises, error codes, smells, puddles. Brand and model help. That detail lets us plan the visit right.
Step 2
We diagnose in person
A technician comes to your kitchen or laundry room and tests the machine instead of guessing. Controls, heating parts, motors, seals, drains. You hear what failed and what the repair involves before work starts.
Step 3
You approve the repair
Nothing gets replaced until you say go. Common parts are handled on site when we have them. If a part must be ordered, we tell you that up front and schedule the return.

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

Symptoms, not scriptsA washer that fills but never spins is a different problem than one that spins but never drains. We ask questions that narrow it down, then confirm with testing. Guesswork wastes parts and your afternoon.
Independent and brand-wideWe are not tied to any manufacturer. That means we work on the big laundry and kitchen names side by side, and we recommend the repair that makes sense for your machine, not one brand's playbook.
Regional coverageBased in Huntsville, we serve homeowners in Alabama, Georgia, Tennessee, Kentucky, Mississippi, Louisiana, Arkansas, North Carolina and South Carolina. One number to call whether you are in a city neighborhood or a small town outside it.
Straight explanationsYou will hear what part failed and why, in plain words. If a machine is worn past sensible repair, we say so. Homeowners make better decisions when nobody is hiding behind jargon.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.