Dryer Repair in Columbus — Book a Visit Today

Drum turns, clothes come out cold. That's the most common dryer call we get in Columbus, and it usually points to a burnt heating element, a tripped thermal fuse, or a bad gas valve coil. Other times the drum won't move at all and a snapped belt is the culprit. Loud thumping? Rollers or an idler pulley. We service electric and gas dryers, stacked units included. Before you run another 90-minute cycle on damp towels, tell us what happens when you press start. Call us or fill out the quote form and we'll sort it out.

Real person answers
Open 7 days
Written quotes

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM CT

Common dryer faults in Columbus homes

"It runs forever and clothes come out damp" Usually a blocked vent, a failed heating element, or a thermostat cutting heat early.
"Drum spins but there's no heat at all" Points to an open element, a blown thermal fuse, or on gas units a dead igniter or valve coil.
"Something's screeching every time the drum turns" Worn drum rollers, a dry idler pulley, or a failing blower wheel bearing make that noise.
"Push start and nothing happens" Door switch, start switch, thermal fuse, or a control board that lost its trigger circuit.
"There's a hot, scorched smell in the laundry room" Lint packed near the heater or a restricted exhaust letting temperatures climb past safe limits — stop using it.

Columbus coverage

We work throughout Columbus — 31901, 31904, 31907 and 31820 — and head up the corridor to LaGrange and Newnan when needed.

Other repairs we do in Columbus

All dryer repair → · All Columbus services →

Dryer Repair in Columbus — quick answers

Why does my dryer take three cycles to dry one load?

Airflow, almost always. Moist air has to leave the machine, and a crushed duct, long run, or lint-packed vent traps it. A weak heating element or a thermostat opening too soon does the same thing. We test both.

Is it worth repairing or should I replace it?

Depends on the part that failed and the condition of the rest. A belt, roller, fuse, or igniter on a solid machine is worth fixing. A cracked drum or a rusted-through cabinet is a different conversation. We tell you straight.

Do you work on gas dryers as well as electric?

Yes. Gas units share the drum, belt, and blower parts with electric models, then add an igniter, flame sensor, and gas valve coils. Those are common failure points and our technicians diagnose them on site.

Can you fix a stacked washer-dryer unit?

We do. Stacked and laundry-center units need the pair separated or partly pulled to reach parts, so the visit takes more room and more care. Clear a path to the closet and we'll handle the rest.

How soon can you get to my house in Columbus?

Tell us the appliance, the brand, and what it's doing when it fails, and we'll book the next open window that fits your side of town. Calls that come in early usually get scheduled sooner. Reach us.

How it works

Step 1
Tell us the symptom
Call us or fill out the form. Describe what the appliance does and does not do. Noises, error codes, smells, puddles. Brand and model help. That detail lets us plan the visit right.
Step 2
We diagnose in person
A technician comes to your kitchen or laundry room and tests the machine instead of guessing. Controls, heating parts, motors, seals, drains. You hear what failed and what the repair involves before work starts.
Step 3
You approve the repair
Nothing gets replaced until you say go. Common parts are handled on site when we have them. If a part must be ordered, we tell you that up front and schedule the return.

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

Symptoms, not scriptsA washer that fills but never spins is a different problem than one that spins but never drains. We ask questions that narrow it down, then confirm with testing. Guesswork wastes parts and your afternoon.
Independent and brand-wideWe are not tied to any manufacturer. That means we work on the big laundry and kitchen names side by side, and we recommend the repair that makes sense for your machine, not one brand's playbook.
Regional coverageBased in Huntsville, we serve homeowners in Alabama, Georgia, Tennessee, Kentucky, Mississippi, Louisiana, Arkansas, North Carolina and South Carolina. One number to call whether you are in a city neighborhood or a small town outside it.
Straight explanationsYou will hear what part failed and why, in plain words. If a machine is worn past sensible repair, we say so. Homeowners make better decisions when nobody is hiding behind jargon.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.